-
Жилищно-коммунальное хозяйство. Домоводство. Бытовое обслуживание
-
Сельское хозяйство. Лесное хозяйство. Охота. Рыболовное хозяйство
-
Строительство. Строительные материалы. Строительно-монтажные работы
-
Управление предприятиями. Организация производства, торговли и транспорта
-
Химическая технология. Химическая промышленность. Родственные отрасли
- Книга (1973)
- Газета (2)
- Журнал (51)
- Автореферат диссертации (966)
- Изоиздание (4)
- Аудиоиздание (4)
- Видеоиздание (40)
- Картографическое издание (3)
- Неопубликованный документ (15)
- Фотография (6)
- Статья (3290)
- Библиографический указатель (16)
- Словарь (12)
- Брошюра (84)
- Буклет (9)
- 3D-модель (2)
- Веб-архив (989)
- Не указан (1)
- Литературно-художественные издания (34)
- Официальные издания (60)
- Научные издания (4591)
- Научно-популярные издания (895)
- Информационные издания (1352)
- Справочные издания (75)
- Учебные издания (199)
- Производственно-практические издания (89)
- Массово-политические издания (168)
- Изобразительное издание (2)
Количество страниц: 5 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
The article presents the results of many years of research in the field of air (dry) method of separation (enrichment) of minerals. The results of a manufactured pneumatic separator of the POS-2000 type, which passed pilot tests in a number of gold ore deposits in Yakutia and the Amur region, are presented. The work presents developments to improve the design and production parameters of the installation, where reduction of weight and size parameters is relevant and in demand at this time, especially for mobile mobile versions of enrichment plants. The article shows laboratory experimental work aimed at a detailed study of the dynamics of the behavior of multiphase media in complex chambers, both in simplified laminar and turbulent cases. For a more detailed study of the influence of different air flow on the process of separating various minerals by density and size, an experimental laboratory installation with three toroidal zones was assembled, consisting of a flexible transparent plastic reinforced pipe, bent in the form of a screw (screw helicoid). The maximum angles of rise of particles along the internal boundary of the laboratory stand, the speed of soaring of particles depending on density and size, the maximum angles of hovering and soaring at different air speeds are considered. Studies have been carried out on the distribution of particles in the radial section in different sections of the pipe (S1-S3), in which angular differences in distribution were obtained due to different levels of the ratio of centrifugal and gravitational forces, at tested speeds and turning radii. Further research aimed at the possibility of modifying the existing pneumatic separator to reduce weight and size and the development of a new type of centrifugal pneumatic separator are shown. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022 of the unified state information system for recording research, development and technological work for civil purposes No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center "Yakut Scientific Center of the Siberian Branch of the Russian Academy of Sciences", grant No. 13. Center for collective use 21.0016.
Лебедев, И. Ф. Теоретические и прикладные основы создания центробежных пневмосепараторов для обогащения драгоценных металлов по плотности и крупности / Лебедев И. Ф. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 11. - С. 155-159. - DOI: 10.17513/use.38157
DOI: 10.17513/use.38157
Количество страниц: 8 с.
- Математика. Естественные науки > Физика,
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Строительство подземных сооружений. Земляные работы,
- НАУКА ЯКУТИИ > МАТЕМАТИКА. ЕСТЕСТВЕННЫЕ НАУКИ > Физика,
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Строительство подземных сооружений. Земляные работы.
One of the effective ways to protect underground mines in mines of the North, operating in alternating or positive thermal conditions, from thawing is the use of heat-protective sprayed concrete coatings with light filler. The article presents the results of research based on the developed methodology and software package for predicting the dynamics and features of the formation of the thermal regime in the mine workings of a gold placer mine in the permafrost zone secured with metal and combined heat-protective shotcrete support. Forecast calculations of the parameters of the thermal regime of workings presented in graphical form were carried out. It was concluded that heat-protective support up to ten centimeters thick does not protect mine workings from thawing and to prevent this it is necessary to use more advanced supports and regulate the thermal regime in the mine in the summer. If the mine is mothballed for the summer, the use of heat-protective shotcrete will allow the mine mothballing period to be shifted to the beginning of June, thereby extending the mining season. It is emphasized that the thermal regime is the main factor determining the operating conditions of a mining enterprise - year-round or with conservation for the summer period, which are determined by technical and economic calculations. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0021 of the unified state information system for recording research, development and technological work for civil purposes No. 122011800083-0) using the equipment of the Center for Collective Use of the Federal research center "Yakut Scientific Center of the Siberian Branch of the Russian Academy of Sciences", grant No. 13. Center for collective use 21.0016.
Прогноз теплового режима горных выработок глубокой золотороссыпной шахты криолитозоны, закрепленных металлической и комбинированной теплозащитной набрызгбетонной крепью / Курилко А. С., Соловьёв Д. Е., Киселев В. В. [и др.] ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 11. - С. 147-154. - DOI: 10.17513/use.38156
DOI: 10.17513/use.38156
Издательство: Книжное издательство
Год выпуска: 1976
Количество страниц: 140 с.
Влияние усталости на хладостойкость сварных соединений / В. П. Ларионов, Р. С. Григорьев, И. М. Стебаков ; Академия наук СССР, Сибирское отделение, Якутский филиал, Институт физико-технических проблем Севера. - Якутск : Книжное издательство, 1976. - 136 с.
Количество страниц: 10 с.
An analysis of modern technologies for pneumatic grain separation is provided. The necessity of increasing the efficiency of pneumatic separation of grain at all stages of its production, starting from the grain combine and ending with the operations of preparing grain for grinding, is substantiated. The main structural and technological reasons for the low efficiency of pneumatic separating systems have been identified. A method for determining the terminal velocity of grain in a portioned pneumatic classifier is presented. The process of pneumatic classification of seeds of cereals that have undergone full-flow seed processing technology has been studied. The basic physical laws for determining the speed of terminal velocity of grain in an ascending vertical air flow are substantiated. It has been established that seed material that has passed through the seed processing production line varies in terminal velocity.
Проблемы и перспективы совершенствования процессов пневмосепарации зерна / В. М. Дринча, Ю. Ж. Дондоков, И. Н. Аммосов [и др.] ; Арктический государственный агротехнологический университет // Вестник АГАТУ. - 2023. - N 4 (12). - C. 92-101.
Количество страниц: 6 с.
Гараничев, М. А. Разработка аппаратно-программного комплекса помониторингу и контролю уровня воды "Smartаква" / М. А. Гараничев, И. М. Филиппов, И. В. Гоголева ; Арктический государственный агротехнологический университет // Вестник АГАТУ. - 2023. - N 4 (12). - C. 78-83.
Количество страниц: 5 с.
Мырьянова, Т. П. Результаты исследования массовой доли влаги в твороге / Т. П. Мырьянова ; Арктический государственный агротехнологический университет // Вестник АГАТУ. - 2023. - N 4 (12). - C. 60-65.
Количество страниц: 6 с.
Мясная продуктивность казахских лошадей Беcкарагайского заводского типа / К. Ж. Исхан, Б. М. Махатов, Ж. Ж. Есенкулова [и др.] ; Казахский национальный аграрный университет, Академия сельскохозяйственных наук Республики Казахстан, Алматинский технологический университет, Якутский научно-исследовательский институт сельского хозяйства им. М. Г. Сафронова // Вестник АГАТУ. - 2023. - N 4 (12). - C. 60-65.
Количество страниц: 10 с.
Елисеева, Л. И. Исследование сыропригодности молока коров для производства мюрюнского сыра / Л. И. Елисеева, П. А. Гоголева ; Арктический государственный агротехнологический университет // Вестник АГАТУ. - 2023. - N 4 (12). - C. 41-50.
Количество страниц: 5 с.
Томашевская, Е. П. Санитарная оценка качества бутилированной воды на территории Якутии / Е. П. Томашевская, М. М. Сидоров, В. К. Егоров ; Арктический государственный агротехнологический университет // Вестник АГАТУ. - 2023. - N 4(12). - C. 20-24.
Количество страниц: 6 с.
Влияние азотнокислого лантана на функциональную активность иммунокомпетентных клеток / С. С. Искандарова, И. Ю. Ездакова, А. И. Федоров [и др.] ; Всероссийский научно-исследовательский институт экспериментальной ветеринарии им. К. И. Скрябина и Я. Р. Коваленко, Арктический государственный агротехнологический университет // Вестник АГАТУ. - 2023. - N 4 (12). - C. 14-19.