-
Жилищно-коммунальное хозяйство. Домоводство. Бытовое обслуживание
-
Сельское хозяйство. Лесное хозяйство. Охота. Рыболовное хозяйство
-
Строительство. Строительные материалы. Строительно-монтажные работы
-
Управление предприятиями. Организация производства, торговли и транспорта
-
Химическая технология. Химическая промышленность. Родственные отрасли
- Книга (1962)
- Газета (2)
- Журнал (51)
- Автореферат диссертации (966)
- Изоиздание (3)
- Аудиоиздание (4)
- Видеоиздание (40)
- Картографическое издание (3)
- Неопубликованный документ (15)
- Фотография (6)
- Статья (3290)
- Библиографический указатель (15)
- Словарь (12)
- Брошюра (84)
- Буклет (7)
- 3D-модель (1)
- Веб-архив (957)
- Не указан (1)
- Литературно-художественные издания (34)
- Официальные издания (60)
- Научные издания (4586)
- Научно-популярные издания (893)
- Информационные издания (1319)
- Справочные издания (72)
- Учебные издания (199)
- Производственно-практические издания (89)
- Массово-политические издания (164)
- Изобразительное издание (1)
Количество страниц: 6 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
For the effective enrichment of gold-containing concentrates and heavy concentrate with a high content of magnetic minerals, a beneficiation method in a jigging machine with a magnetic system has been proposed in the laboratory of the Laboratory mineral processing of the Institute of Mining of the North SB RAS. In the proposed method, a combination of gravitational enrichment and magnetic separation is carried out in a jigging machine. The most important factor in the process of effective extraction of gold from concentrate enrichment products containing iron scrap and minerals with high magnetic susceptibility in a jigging machine is the constant loosening of the forming natural bed. Subsequently, the method was improved and an electric pulse source was developed to create a pole-alternating magnetic field, which makes it possible to ensure a loosened state of the bed. A physical and mathematical model has been developed based on a Fokker - Planck type equation to determine the probability of particles passing through the thickness of a bed under the condition of the required state of loosening. Approbation of the model shows that the obtained calculations correlate with the results of experiments on a jigger with an electromagnetic installation under the conditions of the jiggering process: jigger cycle frequency 210 min-1, bed height 80 mm, amplitude 6 mm and pulse duration of the pole-alternating magnetic field from 0,1 sec. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022, Unified state information system for recording the results of research and development work No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center ҺYakut Scientific Center of the Siberian Branch of the Russian Academy of Sciencesһ (grant No. 13.TSKP.21.0016).
Слепцова, Е. С. Физико-математическая модель проницаемости тяжелых частиц через магнитную постель отсадочной машины с полюс опеременным магнитным полем / Слепцова Е. С., Яковлев Б. В., Матвеев А. И. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 12. - С. 218-223. - DOI: 10.17513/use.38195
DOI: 10.17513/use.38195
Количество страниц: 6 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Строительство подземных сооружений. Земляные работы,
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Строительство. Строительные материалы. Строительно-монтажные работы.
The study is aimed at solving the urgent problem of stabilizing the temperature regime of construction sites and operation of engineering structures in the permafrost zone of the Republic of Sakha (Yakutia) and a changing climate. The currently used method of soil cooling using seasonally operating cooling devices, despite its effectiveness, requires a long exposure time and significantly delays construction time, which in some cases is unacceptable. In order to evaluate the effectiveness and prospects of the technology of rapid soil freezing using solid carbon dioxide (dry ice) for cooling permafrost soils, a full-scale experiment was carried out. To conduct the experiment, a test site was equipped at one of the construction sites in Yakutsk with the installation of cooling and thermometric wells. During the experiment, the temperature field of the soil and the temperature inside the cooling well were recorded. As a result of the experiments, actual data were obtained on the distribution of temperature in the soil depending on the temperature and distance from the cooling well during the cooling effect and after it. The results obtained provide grounds for assessing the tested technology as promising in the conditions of permafrost soils in Yakutia.
Экспериментальные исследования процесса охлаждения грунта с применением твердого диоксида углерода в условиях криолитозоны Якутии / Большев К. Н., Степанов А. В., Малышев А. В. [и др.] ; Институт физико-технических проблем Севера им. В. П. Ларионова, Якутский государственный проектный научно-исследовательский институт строительства // Успехи современного естествознания. - 2023. - N 12. - С. 204-209. - DOI: 10.17513/use.38193
DOI: 10.17513/use.38193
Количество страниц: 6 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
The results of experimental studies to identify changes in the aerodynamic properties of particles of a malleable useful component (gold) during the disintegration process on a fundamentally new laboratory two-stage cone impact mill are presented. Lead markers of various configurations, as well as random particles of ore gold, act as gold simulators. This mill is designed specifically for the chain of dry concentration devices. The mill includes two zones of destruction of geomaterials. The upper elongated cone-shaped zone formed between the working rotor and the inner surface of the installation housing. Due to the narrowing of the space between the working surfaces, close contact of ore particles is created with each other and with the working bodies. In the lower sequential zone, in the zone of free movement of particles by rolling along the surface of the external working rotor, intensive forging of lamellar particles of the useful component of the ore occurs by the flow of pelitic ore material formed during the destruction process in the upper zone of the mill. In the process of conducting laboratory research on the particles of the useful component, a close analogy was discovered in the properties of their behavior in an aerodynamic and liquid environment. The soaring speed (SV) of gold particles less than 2 mm, with the same physical parameters, as well as their hydraulic size (HF), depends only on the thickness. At the same time, in the mill during the grinding process, the particles of ore gold undergo thickening of the edges. Processed particles of lead markers and gold retain their physical weight, and their degree of extraction by dry enrichment increases by 1.5-2 times due to isometrization of forms. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022 of the unified state information system for recording research, development and technological work for civil purposes No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center ҺYakut Scientific Center of the Siberian Branch of the Russian Academy of Sciencesһ, grant No. 13. Center for collective use 21.0016.
Осипов, Д. А. Изменение аэродинамических свойств частиц полезного компонента в двухступенчатой конусной мельнице / Осипов Д. А. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 11. - С. 180-185. - DOI: 10.17513/use.38161
DOI: 10.17513/use.38161
Количество страниц: 8 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
This work is carried out in the laboratory of the Laboratory of mineral processing Institute of Mining of the North and is a continuation of research conducted on a steep-slope concentrator protected by a patent of the Russian Federation. Earlier, on the basis of experimental work carried out on a steeply inclined concentrator, unsatisfactory extraction of the useful component, clogging of the concentrate in the storage chambers, uneven dynamic processes over the entire area of the working surface of the concentrator were revealed. In order to further improve the concentrator, a shut-off valve was installed at the nozzle for water supply throughout the entire volume of the concentrator. Experimental studies have been carried out to improve the efficiency of mineral separation, where special attention is paid to the stability of the dynamic processes occurring throughout the working chamber of the concentrator, the exclusion of the formation of stagnant zones due to flow control and improving the quality of the concentrate as a whole. Thanks to the adjustment of the operating modes of the concentrator by the shut-off valve, it is generally possible to get rid of these negative phenomena and significantly increase the area of the effective working area. The most rational results are determined when the deck of the concentrator 700 is tilted, where the extraction of heavy fraction (magnetite) reaches 91.16 % at a speed of 0.35 l/s. The use of a shut-off valve makes it possible to regulate the flow of water inside the concentrator, at which conditions for effective separation of mineral particles are found. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022 of the unified state information system for recording research, development and technological work for civil purposes No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center "Yakut Scientific Center of the Siberian Branch of the Russian Academy of Sciences", grant No. 13. Center for collective use 21.0016.
Лебедев, И. Ф. Экспериментальные работы для определения параметров лабораторной модели крутонаклонного концентратора / Матвеев А. И., Еремеева Н. Г., Нечаев П. Б. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 11. - С. 160-167. - DOI: 10.17513/use.38158
DOI: 10.17513/use.38158
Количество страниц: 5 с.
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры),
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Горное дело. Горные предприятия (рудники, шахты, карьеры).
The article presents the results of many years of research in the field of air (dry) method of separation (enrichment) of minerals. The results of a manufactured pneumatic separator of the POS-2000 type, which passed pilot tests in a number of gold ore deposits in Yakutia and the Amur region, are presented. The work presents developments to improve the design and production parameters of the installation, where reduction of weight and size parameters is relevant and in demand at this time, especially for mobile mobile versions of enrichment plants. The article shows laboratory experimental work aimed at a detailed study of the dynamics of the behavior of multiphase media in complex chambers, both in simplified laminar and turbulent cases. For a more detailed study of the influence of different air flow on the process of separating various minerals by density and size, an experimental laboratory installation with three toroidal zones was assembled, consisting of a flexible transparent plastic reinforced pipe, bent in the form of a screw (screw helicoid). The maximum angles of rise of particles along the internal boundary of the laboratory stand, the speed of soaring of particles depending on density and size, the maximum angles of hovering and soaring at different air speeds are considered. Studies have been carried out on the distribution of particles in the radial section in different sections of the pipe (S1-S3), in which angular differences in distribution were obtained due to different levels of the ratio of centrifugal and gravitational forces, at tested speeds and turning radii. Further research aimed at the possibility of modifying the existing pneumatic separator to reduce weight and size and the development of a new type of centrifugal pneumatic separator are shown. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0022 of the unified state information system for recording research, development and technological work for civil purposes No. 122011800089-2) using the equipment of the Center for Collective Use of the Federal research center "Yakut Scientific Center of the Siberian Branch of the Russian Academy of Sciences", grant No. 13. Center for collective use 21.0016.
Лебедев, И. Ф. Теоретические и прикладные основы создания центробежных пневмосепараторов для обогащения драгоценных металлов по плотности и крупности / Лебедев И. Ф. ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 11. - С. 155-159. - DOI: 10.17513/use.38157
DOI: 10.17513/use.38157
Количество страниц: 8 с.
- Математика. Естественные науки > Физика,
- Прикладные науки. Медицина. Ветеринария. Техника. Сельское хозяйство > Инженерное дело. Техника в целом > Строительство подземных сооружений. Земляные работы,
- НАУКА ЯКУТИИ > МАТЕМАТИКА. ЕСТЕСТВЕННЫЕ НАУКИ > Физика,
- НАУКА ЯКУТИИ > ПРИКЛАДНЫЕ НАУКИ. МЕДИЦИНА. ТЕХНИКА. СЕЛЬСКОЕ ХОЗЯЙСТВО > Инженерное дело. Техника в целом > Строительство подземных сооружений. Земляные работы.
One of the effective ways to protect underground mines in mines of the North, operating in alternating or positive thermal conditions, from thawing is the use of heat-protective sprayed concrete coatings with light filler. The article presents the results of research based on the developed methodology and software package for predicting the dynamics and features of the formation of the thermal regime in the mine workings of a gold placer mine in the permafrost zone secured with metal and combined heat-protective shotcrete support. Forecast calculations of the parameters of the thermal regime of workings presented in graphical form were carried out. It was concluded that heat-protective support up to ten centimeters thick does not protect mine workings from thawing and to prevent this it is necessary to use more advanced supports and regulate the thermal regime in the mine in the summer. If the mine is mothballed for the summer, the use of heat-protective shotcrete will allow the mine mothballing period to be shifted to the beginning of June, thereby extending the mining season. It is emphasized that the thermal regime is the main factor determining the operating conditions of a mining enterprise - year-round or with conservation for the summer period, which are determined by technical and economic calculations. The work was carried out within the framework of the state assignment of the Ministry of Science and Higher Education of the Russian Federation (topic No. 0297-2021-0021 of the unified state information system for recording research, development and technological work for civil purposes No. 122011800083-0) using the equipment of the Center for Collective Use of the Federal research center "Yakut Scientific Center of the Siberian Branch of the Russian Academy of Sciences", grant No. 13. Center for collective use 21.0016.
Прогноз теплового режима горных выработок глубокой золотороссыпной шахты криолитозоны, закрепленных металлической и комбинированной теплозащитной набрызгбетонной крепью / Курилко А. С., Соловьёв Д. Е., Киселев В. В. [и др.] ; Институт горного дела Севера им. Н. В. Черского // Успехи современного естествознания. - 2023. - N 11. - С. 147-154. - DOI: 10.17513/use.38156
DOI: 10.17513/use.38156
Издательство: Книжное издательство
Год выпуска: 1976
Количество страниц: 140 с.
Влияние усталости на хладостойкость сварных соединений / В. П. Ларионов, Р. С. Григорьев, И. М. Стебаков ; Академия наук СССР, Сибирское отделение, Якутский филиал, Институт физико-технических проблем Севера. - Якутск : Книжное издательство, 1976. - 136 с.
Количество страниц: 7 с.
The article provides brief information on the current state of healthcare in the Oymyakonsky ulus of the Republic of Sakha (Yakutia). Based on a survey of 440 respondents, the social conditions of local residents and those who have moved from this district to other settlements of the Russian Federation have been analyzed. The reasons for the migration outflow of the population from Oymyakonskii ulus of Yakutia to other settlements of the Russian Federation were reviewed. It was revealed that 42,8 % of the respondents are planning to move to another district or city, and 32,8 % periodically have a similar intention. The study showed that only 4.1 % of ulus residents are satisfied by the performance of local physicians, whereas among those who have previously left the region this indicator was 47.6 %. This fact is mainly due to the lack of specialized doctors and the high turnover rate due to the lack of housing for visiting specialists, difficult living conditions and harsh climate. According to the respondents, unsatisfaction with the quality of medical care and the desire to give a good education to children are the strongest predictors of the emigration of the local population outside the ulus. It is important to note that the vast majority of those who have left the district do not plan to return. All of the above shows that this problem requires comprehensive government assistance, especially in the field of health care.
Слепцов, С. С. Влияние качества здравоохранения на отток населения из отдаленных районов Якутии (на примере Оймяконского улуса) / Слепцов С. С., Андреев М. Н., Слепцова С. С. ; Якутский научный центр комплексных медицинских проблем, Северо-Восточный федеральный университет им. М. К. Аммосова // Успехи современного естествознания. - 2023. - N 7. - С. 42-48. - DOI: 10.17513/use.38069
DOI: 10.17513/use.38069
Количество страниц: 48 с.
The article discusses the skidding concept, types and methods. In addition to specialized skidding tractors (cable skidder, grapple skidder, with a pack grip, and forwarders), modern single-machine complexes for harvesting wood according to Canadian and Scandinavian cutting technologies are presented. A theoretical analysis of tractor skidding performance is carried out, namely: the influence of the average skidding distance and soil conditions is estimated; an assessment of the impact of the type of logging and the taxation characteristics of the stand is given; the influence of soil and terrain conditions is estimated; the impact of the operator's qualifications and working conditions is evaluated. Based on the analysis of literature sources and production experience in the field of logging operations, the expediency of changing the operating mode of operators, as well as the use of special application software packages that allow real-time evaluation of the efficiency of the skidding tractor and its technical condition is justified. The influence of the category of soil conditions and the presence of non-operational areas in the cutting area on the average skidding distance, other conditions being equal, is shown. The work was carried out within the framework of the scientific school "Innovative developments in the field of logging industry and forestry" of the Arctic State Agrotechnological University.
Анализ влияния природно-производственных условий на производительность тракторной трелевки / О. А. Куницкая, А. В. Петров, А. А. Кривошеев [и др.] ; Арктический государственный агротехнологический университет, Ухтинский государственный агротехнологический университет, Военный учебно-научный центр Военно-воздушных сил "Военно-воздушная академия им. проф. Н. Е. Жуковского и Ю. А. Гагарина", АО "Гипростроймост-Санкт-Петербург" // Вестник АГАТУ. - 2023. - N 4 (12). - C. 102-149.